|
|
 |
|
|
 |
 |
|
|
|
 |
1.Sequence control to power applications
2.A wide range of variations and options available
3.Arc suppression barrier, 3 and 4 pole types
4.Conforms to various safety standard
|
 |
|
1.Process controls, Sequence controls data processing
|
|
|
|
 |
| To convert into inches, multiply by 0.03937 |
| Contact data |
| Arrangement |
1 Form C (SPDT) to 4 Form C (4PDT) |
| Contact material |
AgCdO |
| Initial contact resistance |
50mΩ max. |
| Rated load, resistive |
1,2,3 Form C |
4 Form C |
5A 24VDC
5A 240VAC |
3A 24VDC
3A 240VAC |
| Maximum switching current |
15A |
3A |
Maximum switching
capacity |
with DC voltage:
with AC voltage: |
210W
1,200VA |
72W
720VA |
| Maximum switching voltage |
125VDC
250VAC |
| Minimum switching rating 1) |
100mA 5VDC |
|
1)
Min. Switching Load mentioned above are reference values.
Therefore it is recommended to perform the confirmation test with the actual load before production since reference values may vary according to switching frequencies,
environmental conditions and expected reliability levels.
|
|
| Coil data |
| Nominal voltage |
6VDC to 110VDC
6VAC to 240VAC |
| Nominal power consumption 2) |
DC Coil:
AC Coil: |
0.9W approx.
0.9VA to 1.2VA (60Hz) approx. |
| Operate voltage 3) |
80% of nominal voltage |
| Release voltage 4) |
DC Coil:
AC Coil: |
10% of nominal voltage
30% of nominal voltage |
|
2), 3), 4)The values depend on coil voltage, see Part selection chart
|
|
| Contact data |
| Operate time |
20ms max. at nominal voltage |
| Release time |
20ms max. at nominal voltage |
| Initial insulation resistance |
100 MΩ min. (500VDC) |
| Dielectric strength |
Between open contacts:
Between contacts & coil: |
1,000Vrms for 1 minute
1,500Vrms for 1 minute |
| Expected life |
Mechanical:
Electrical: |
More than 1,000,000 operations
More than 100,000 operations at rated load |
| Vibration resistance |
Functional:
Destructive: |
10∼55Hz dual amplitude: 1.5mm
10∼55Hz dual amplitude: 1.5mm |
| Shock resistance |
Functional:
Destructive: |
10G min.
100G min. |
| Ambient temperature |
DC Coil:
AC Coil: |
－35℃∼＋55℃ (with no icing) |
| Humidity |
35% to 85% RH |
| Weight |
33g approx. |
|
Note: The above figures are initial values
|
|
Part number description is provided for reference, part number can not be arbitrarily composed.
Refer to the part numbers shown in the table below. Special designs to customer specifications are possible; please contact HR.
|
|
|
|
 |
|
