|
|
 |
|
|
 |
 |
|
|
|
 |
1.Designed for heavy inductive load application
2.2mm lower in height than HR-CR6 Series
3. High surge strength 10,000V
4. Characteristics deformation caused during Quick-connect placement and removal prevented by a built-in absorber
|
 |
|
1.Home appliance, Motor, Heater
|
|
|
|
 |
| To convert into inches, multiply by 0.03937 |
 |
Copper-side view
|
 |
Copper-side view
|
| Contact data |
| Arrangement |
1 Form A (SPST) |
| Contact material |
Ag Alloy |
| Initial contact resistance |
30mΩ max. |
| Rated load, resistive |
20A 125VAC, 16A 250VAC/30VDC |
| Maximum switching current |
20A |
| Maximum switching capacity |
4,000VA, 480W |
| Maximum switching voltage |
30VDC / 250VAC |
| Coil data |
| Nominal voltage |
5VDC to 48VDC |
| Nominal power consumption 1) |
540mW |
| Operate voltage 2) |
80% of nominal voltage |
| Release voltage 3) |
10% of nominal voltage |
|
1), 2), 3)The values depend on coil voltage, see Part selection chart
|
|
| Contact data |
| Operate time |
20ms max. at nominal voltage |
| Release time |
10ms max. at nominal voltage |
| Initial insulation resistance |
1,000 M min. (500VDC) |
| Dielectric strength |
Between open contacts:
Between contacts & coil: |
1,000VACrms for 1 minute
4,500VACrms for 1minute |
| Surge strength |
Between contacts & coil: |
10,000V |
| Expected life |
Mechanical:
Electrical: |
More than 1,000,000 operations
More than 100,000 operations at rated load |
| Vibration resistance |
Functional:
Destructive: |
10∼55Hz dual amplitude: 1.5mm
10∼55Hz dual amplitude: 1.5mm |
| Shock resistance |
Functional:
Destructive: |
10G min.
100G min. |
| Ambient temperature |
-30℃ to +60℃ (with no icing) |
| Humidity |
45% to 80% RH |
| Weight |
15g approx. |
|
Note: The above figures are initial values
|
|
|
Part number description is provided for reference, part number can not be arbitrarily composed. Refer to the part numbers shown in the table below. Special designs to customer specifications are possible; please contact HR.
|
|
| Part number |
Nominal
voltage
(VDC) |
Coil
resistance
(Ω±10%) |
Nominal
current
(mA) |
Must operate
voltage
(VDC) |
Must release
voltage
(VDC)) |
Max
voltage
(VDC) |
Nominal
power
(mW) |
| Quick-connect(#250) type |
| HR-CR6S DC05V |
5 |
46.3 |
108 |
4.0 |
0.5 |
6.5 |
540 |
| HR-CR6S DC06V |
6 |
66.7 |
90 |
4.8 |
0.6 |
7.8 |
| HR-CR6S DC09V |
9 |
150 |
60 |
7.2 |
0.9 |
11.7 |
| HR-CR6S DC12V |
12 |
270 |
45 |
9.6 |
1.2 |
15.6 |
| HR-CR6S DC24V |
24 |
1,067 |
22.5 |
19.2 |
2.4 |
31.2 |
| HR-CR6S DC48V |
48 |
4,267 |
11.2 |
38.4 |
4.8 |
62.4 |
| Quick-connect(#250) type |
| HR-CR6S DC05V |
5 |
46.3 |
108 |
4.0 |
0.5 |
6.5 |
540 |
| HR-CR6S DC06V |
6 |
66.7 |
90 |
4.8 |
0.6 |
7.8 |
| HR-CR6S DC09V |
9 |
150 |
60 |
7.2 |
0.9 |
11.7 |
| HR-CR6S DC12V |
12 |
270 |
45 |
9.6 |
1.2 |
15.6 |
| HR-CR6S DC24V |
24 |
1,067 |
22.5 |
19.2 |
2.4 |
31.2 |
| HR-CR6S DC48V |
48 |
4,267 |
11.2 |
38.4 |
4.8 |
62.4 |
|
|
Note: All values in the chart are measured at 23℃
|
|
|
|
 |
|
